Том 27, номер 04, статья № 16

pdf Piquet H., Florez D., Bonnin X., Belinger A., Diez R. Couplings between a resonant current source power supply and a DBD excilamp. // Оптика атмосферы и океана. 2014. Т. 27. № 04. С. 354-362.
Скопировать ссылку в буфер обмена
Аннотация:

This paper presents a study of couplings which take place in systems where dielectric barrier discharge (DBD) excimer lamps are supplied with current source electrical power generators. Causal analysis, using the fundamental properties of the DBD, is used for the design of such current sources. A two steps approach is developed here: in order to control the lamp power, with the best efficiency concerning the UV emission, a current shape controlled current generator is set-up to investigate the possible degrees of freedom of the current waveforms: frequency, peak current, pulse duration.
On this basis, “optimized” supplying conditions are selected, and a second power generator with high electrical efficiency is designed: its operating mode combines discontinuous current mode and soft-commutation (ZCS), obtaining as well low electromagnetic emissions and reduced switching losses. A classical electrical equivalent model of the lamp is used to achieve the state plane analysis and to calculate all the electric variables involved in the design of the converter and consequently to select its components. The mathematical relationships obtained from this process, especially those concerning the control of the injected power by means of the available degrees of freedom, are validated with simulations and experimental results. Experimental UV emission performances are presented as well.

Ключевые слова:

dielectric barrier discharge, excimer lamps, power supply, optimization, resonant inverter, UV

Список литературы:

1. Kogelschatz U. Dielectric-Barrier Discharges: Their History, Discharge Physics, and Industrial Applications // Plasma Chemistry and Plasma Processing. 2003. V. 23, N 1. P. 26–31.
2. Lomaev M.I., Skakun V.S., Sosnin A., Tarasenko V.F., Shitts D.V., Erofeev M.V. Excilamps: efficient sources of spontaneous UV and VUV radiation // Physics Uspekhi. 2003. V. 46, N 2. P. 193–209.
3. Sosnin E.A., Oppenländer T., Tarasenko V.F. Applications of capacitive and barrier discharge excilamps in photoscience // J. Photochemistry and Photobiology C: Photochemistry Reviews. 2006. V. 7, N 4. P. 145–163.
4. Diez R., Salanne J.-P., Piquet H., Bhosle S., Zissis G. Predictive model of a DBD lamp for power supply design and method for the automatic identification of its parameters // The European Physical J. Phys. D: Appl. Phys. 2007. V. 37, N 3. P. 307–313.
5. Lopez A.M., Piquet H., Patino D., Diez R., Bonnin X. Parameters Identification and Gas Behavior Characterization of DBD Systems // IEEE Trans. on Plasma Science. 2013. V. 41, N 8. P. 2335–2342. DOI: 10.1109/ TPS.2013.2273462.
6. Mildren R., Carman R., Falconer I. Visible and VUV emission from a xenon dielectric barrier discharge using pulsed and sinusoidal voltage excitation waveforms // IEEE Trans. on Plasma Science. 2002. V. 30. P. 192–193.
7. Williamson J.M., Trump D.D., Bletzinger P., Ganguly B.N. Comparison of high-voltage ac and pulsed operation of a surface dielectric barrier discharge // J. Phys. D: Appl. Phys. 2006. V. 39. P. 4400–4406.
8. Diez R., Piquet H., Cousineau M., Bhosle S. Current-Mode Power Converter for Radiation Control in DBD Excimer Lamps // IEEE Trans. on Industrial Electronics. 2012. V. 59, N 4. P. 1912–1919.
9. Piquet H., Bhosle S., Diez R., Erofeev M. Pulsed Current-Mode Supply of Dielectric Barrier Discharge Excilamps for the Control of the Radiated Ultraviolet Power // IEEE Trans. on Plasma Science. 2010. V. 38, N 10. P. 2531–2538.
10. Bonnin X., Piquet H., Naudé N., Bouzidi M.C., Gherardi N., Blaquière J.-M. Design of a current converter to maximize the power into homogeneous dielectric barrier discharge (DBD) devices // The European Physical J. Appl. Phys. 2013. V. 64. P. 10901. DOI: 10.1051/ epjap/2013130080.
11. Cousineau M., Diez R., Piquet H., Durrieu O. Synthesized High-Frequency Thyristor for Dielectric Barrier Discharge Excimer Lamps // IEEE Trans. on Industrial Electronics. 2012. V. 59, N 4. P. 1920–1928.
12. Bonnin X., Piquet H., Diez R., Florez D. Designing the high voltage transformer of power supplies for DBD: Windings arrangement to reduce the parasitic capacitive effects // 15th European Conference on Power Electronics and Applications (EPE). 2013. P. 1–9. DOI: 10.1109/EPE.2013.6631928
13. Flórez D., Diez R., Hay K., Piquet H. DBD Excimer Lamp Power Supply with Fully Controlled Operating Conditions // OPTIM Conf., IEEE. 2012.
14. Flórez D. Power supplies for the study and efficient use of DBD excimer lamps // PHD thesis from University of Toulouse (France). January, 2014.
15. Chéron Y. Soft Commutation. London: Chapman & Hall, 1992.
16. Kalisiak S., Holub M., Jakubowski T. Resonant inverter with output voltage pulse-phase-shift control for DBD plasma reactor supply // 13th European Conf. on Power Electronics and Applications, EPE'09. 2009.
17. Alonso J., Garcia J., Calleja A., Ribas J., Cardesin J. Analysis, design, and experimentation of a high-voltage power supply for ozone generation based on current-fed parallel-resonant push-pull inverter // IEEE Trans. on Industry Applications. 2005. V. 41, N 5. P. 1364–1372.
18. Meisser M., Kling R., Heering W. Universal Resonant Topology for High Frequency Pulsed Operation of Dielectric Barrier Discharge Light Sources // Applied Power Electronics Conf. and Exposition (APEC). Twenty-Sixth Annual IEEE, 2011.
19. Flórez D., Diez R., Piquet H. Series-resonant inverter in DCM mode for the supply of a DBD excimer UV lamp // Industry Applications Society Annual Meeting (IAS). IEEE. 2012. P. 1–8.

Вернуться